Descrizione
The 3.3V DFduino Pro Mini 8Mhz(Arduino Pro Mini Compatible) is a microcontroller board based on the ATmega328.It is a 3.3V DFduino running the 8MHz bootloader (select ‘Arduino Duemilanove w/ 328’ within the Arduino software). It is an advance version of offical Arduino Pro Mini. The DFRduino Pro mini has 8 analog inputs compared with offical 6. The rest bits are exactly the same. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or DFRobot breakout board to provide USB power and communication to the board. The DFRduino Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the Arduino Mini.
We recommand that you choose one of following items to program and supply power for your Mini pro board.
1. FTDI Basic Breakout 3.3/5V (Arduino Compatible)
2. USB Serial Light Adapter (Arduino Compatible)
CARATTERISTICHE TECNICHE:
- Ingresso DC 3.3V fino a 8V (alimentazione da pin RAW)
- 3.3v ingresso DC (dal pin VCC)
- Bootloader: Arduino Pro / Pro Mini (3.3V, 8Mhz) w / Atmega328
- Regolatore 3.3V
- Uscita Max 150mA
- ATmega328 esecuzione a 8 MHz con risuonatore esterno (tolleranza dello 0,5%)
- Scheda a bassa tensione non ha bisogno di circuiti di interfaccia per dispositivi popolari 3.3V e moduli (GPS, accelerometri, sensori, ecc)
- Connessione USB off bordo
- Supporta auto-reset
- Sovracorrente protetta
- Polarità protetta
- Sulla scheda di alimentazione e di stato LED
- Dimensioni: 0.7×1.3 “(18x33mm)
- Envionment Amichevole: Rohs Compliance
